6.3 Edge 1 Release Notes

Now you can edit XML configuration for smart servers.

CORE-15165

CORE-15166

CORE-14281

Improved the databases migration to upgrade the Control Panels on CentOS 7 compute resources to the updated version of MariaDB.

CLOUDBOOT-587

• libguestfs-winsupport
• virtio-win
• Virt-v2v
• unzip
• OVMF

Updated the following components for CentOS 7 Xen ramdisk:

• A kernel version to 4.9.215-36.el7.x86_64
• A UFS filesystem driver sources version based on a kernel version 4.9.215-36.el7.x86_64 compelled with super-ufs_fs_write.patch patch
• A wireguard sources version to 0.0.20190702 based on a kernel version 4.9.215-36.el7.x86_64

Updated the following components for CentOS 6 Xen ramdisk:

• A kernel version to 4.9.215-36.el6.x86_64
• A UFS filesystem driver sources version based on a kernel version 4.9.215-36.el6.x86_64 compelled with super-ufs_fs_write.patch patch
• A wireguard sources version to 0.0.20190702 based on a kernel version 4.9.215-36.el6.x86_64

Updated the following components for CentOS v.7.8.2003 KVM ramdisk:

• A libvirt version to 4.5.0-33.el7
• A qemu-kvm-ev version to 2.12.0-44.1.el7_8.1

Updated the following components for CentOS 6 KVM ramdisk:

• A kernel version to 2.6.32-754.29.1.el6.x86_64 to address the CVE-2019-17666, RedHat 1485759 and 1775226 issues
• A qemu-kvm version to 0.12.1.2-2.506.el6_10.7 compiled with --enable-io-throttling to addres RedHat bz#1791680 and bz#1798966 issues

Updated the following components for CentOS 7 KVM ramdisk:

• A CentOS version to 7.8.2003
• A kernel version to 3.10.0-1127.el7.x86_64 to address the CVE-2019-14901 issue
• An XFS filesystem driver sources version to 3.10.0-327.36.3.el7.x86_64 based on a kernel version 3.10.0-1127.el7.x86_64 compiled with the following patches:
• xfs-make-xfs_bmbt_to_iomap-available-outside-of-xfs_.patch
• iomap-Switch-from-blkno-to-disk-offset.patch
• dax-give-DAX-clearing-code-correct-bdev.patch
• xfs_posix_acl_valid.patch;
• A UFS filesystem driver sources version based on a kernel version 3.10.0-1127.el7.x86_64 compelled with R/W support patch
• A wireguard kernel module version to 1.0.20200426
• A wireguard-tools version to 1.0.20200319

Updated the following components for CentOS 7 KVM ramdisk:

• A CentOS version to 7.8.2003
• A wireguard kernel module version to 1.0.20200426
• A wireguard-tools version to 1.0.20200319

If you created a template from a VS disk backup and did not add it to a template store, it was charged incorrectly.

Users with a default set of permissions and enabled See list of all compute zones permission could not see any compute zones.

Users without the Update Yubikey permission could still use the Manage YubiKeys button of other users at the User Details page.

When you accessed the Payments page, there was no active link for payments in the sidebar menu of the Virtuozzo OnApp dashboard.

When you tried to add step to a recipe and tried to select some value from the On Failure dropdown menu of the Add step to recipe form, the scrollbar dissapeared from the menu.

After you selected the number of items to filter records at the Schedule Log page, you could not switch between the pages using the pagination buttons.

The Operating System Type label was aligned incorrectly at the Compute Resource Details page.

Some UI frames were distorted when you tried to zoom out the VS Overview page.

Migration to from VMware to KVM failed for vCenter Linux-based VSs with three or more disks.

When you tried to suspend a CDN resource at the CDN Resource Details page, the transaction was successful but resulted in incorrect message in the infobox section.

When you tried to create an Edge/Storage server, the Cancel button was only pertly clickable at the Cloud Locations step of the VS creation wizard.

Converting imported OVA archive into template failed if the OVA file had several disks of non VMDK format.

After you configured the value of start day at the Usage Statistics page, it was impossible to edit.

When you set the value of end date less than the start date value at the Backups page, the view of the page was distorted.

Long labels of system service add-ons and VSs associated with them were displayed truncated at the SPLA Report and System Service Add-ons Report pages.

After you added federated compute resource group to the cloud with CloudBoot compute resources at the Buyer side, CloudBoot compute resource was updated on the Seller side instead.

There was no confirmation box for rebooting the VS after ticking Virtual VPU hot add or Memory hot add checkboxes at the Edit Virtual Server page.

Both virtual servers in Powered on and Powered off status were displayed in the same color at the Virtual Servers page.

Once you accessed the Activity Log or Failed Actions tabs at the Sysadmin Tools page, the breadcrumbs dissapeared and you could not return to the main page.

When you enabled rate limits for an edge gateway, both incoming and outgoing rate limits were set to invalid 0.00 value.

When you tried to add VS via API and set template backup_server_id parameter to null, the location_group_id parameter was set incorrectly.

When hovering over the password field at the VS Details page, the password label was blinking.

When you entered some invalid information during an Organization Network creation, all the inserted data was reset and you had to fill it in again.

It was impossible to reboot or shutdown Storage or Edge servers from the Edge Accelerators menu although you could do it via API.

The redundant Restore Infoboxes button was displayed at the Edit user page.

When you tried to filter firewall or NAT rules for NSX edge gateway and then disable filter, the Save button was disabled instead.

After you deployed a vCenter VS from Windows or OVA template and tried to edit its time zone, the ResizeVirtualServer transaction was triggered.

When you tried to edit NSX edge gateway in one tab and switch to another tab, your changes were lost and you did not receive any warning about that.

When you tried to create a new ISO via API and set the allowed_hot_migrate parameter to true , the ISO was created with this parameter set to false .

It was possible to select an end date that was less than the start date for IP usage at the IP Report page.

During adding new NSX Edge resources to the Access Control section in a bucket not only edge gateways but also isolated networks were available for selection.

When you tried to edit notifications from the Compute Zones page, the 500 Internal Server Error appeared.

After you configured an end time for a new notification in Federation compute zone at the Compute Zones page, the dates in the datepicker were disabled.

After you created a vApp with two data stores and one vCloud VS that you tried to edit disk for, you could see all data stores even those not allowed by bucket. When you selected that datastore, the error appeared.

When you tried to add compute zone to Federation, the Private checkbox and Description fields shifted.

After you moved a VS between two compute zones with different price configuration, the price for the VS was not updated at the VS Overview page as expected.

When you clicked the Power off button for a mixed vApp at the vApps page, the powered on VSs of this vApp were not powered off.

System error appeared at the Logs page after you created a VS and then deleted its primary and swap disk.

After you subscribed to a compute zone in Federation, the statistics for buyer's VSs was not gathered and displayed at the Dashboard.

When you tried to migrate a VS with swap disk enabled from Xen to KVM compute resource, the transaction failed.

When you tried to create a CloudBoot compute resource and selected static IP address from the CloudBoot IP pool, the transaction failed due to the kernel panic error.

After you increased a disk size for a vCenter VS and saved changes, the VS was restarted.

When you tried to add a disk to a vCenter VS, both available and unavailable data stores were displayed in the Data Store dropbox at the Add New Disk page.

After you updated the power status of the VS and closed the corresponding notification message, it appeared again at the very next page that you accessed.

When you tried to create a new vApp, the labels were cropped in the Password Reset section at the Guest Customization step of the creation wizard.

When the popups for limits configuration exceeded the size of the page in the Rate Card section of your bucket, the labels on the bottom of the page were cropped.

When you tried to remove zombie logical volumes after removing disks, the transaction failed but was marked as complete at the Logs page.

During migration of a vCenter VS disk it was possible to select mismatching data center and so the transaction failed.

Users who had vCenter VSs without service credentials could edit the disk settings at Settings > Disks menu.

After you created a user role with Any action on buckets and networks permisson enabled and limited access to networks defined by bucket in restriction set, the restriction was not applied at the Networks page.

In case of having two vCenter compute resource clusters with the same identifiers you could select the wrong cluster at the Compute Resources step of the VS creation wizard.

After you set up notifications for the Hourly storage health report event at the Subscriptions page, you did not receive any message on the Deliveries page.

The Hypervisor column was empty when you tried to view the details of the vDisk from the Integrated Storage datastore at the Storage Node Details page.

When you tried to view the details of the vDisk from the Integrated Storage datastore at the Storage Node Details page, some table labels were overplapped with the error message.

When you tried to import or resync a vCenter VS created from CHR OVA template, the transaction failed with the following error System Error ('undefined method `domainName' for nil:NilClass').

If you submitted an invalid Edit CDN Resource API request, the 500 Internal Server Error appeared in the output instead of 400 Bad Request error.

6.0.0-275 - 6.2

6.2.0-156

6.2

6.2.0-156